A message from airhorn-AL:
 
Hello,

On this page I will be featuring my customers rides. Along with the pictures, I'll give a description of my products that were installed. I've tried to compile the most popular options, combining horns with air supplies ultimately achieving the most "Bang for your Buck". Moreover, we can always build a system to your specifications if you don't see a combination listed here to your satisfaction. As always, thanks for your consideration.
 
This is my personal truck that I have setup to do shows with. I have installed a BUBBA 3 Train horn with a 1/2" Electric Drop Valve. I used a 3/8" air line. I've installed a Model 500 air system to go along w/ the train horn. Additionally, I have installed another Viar 380c coupled with a 5 gallon Long tank. With this setup I have the "CHIEF" - Model # 846 horn attached with a G4 valve.

This customer installed a BUBBA "LOCO" with a Model 500 air system. The horn is mounted on the upright part of the trucks bed on the outside, while the air system is mounted inside the tool box.

This customer purchased a BUBBA 3 Train horn with a 1/2" Electric Drop Valve. Along with this he installed a Model 300 air system using 3/8 inch tubing. The train horn is mounted under the vehicle while the air system is inside the tool box.

This customer purchased a BUBBA 3 Train horn. To supply the air he bought a Model 300 air system, which was modified to the extent of running 1/2" air line along with a 1/2" Lanyard -Model V -08, Pandora valve. All of this train horn system was mounted underneath the truck while the Pandora valve was mounted inside within easy activation range.